|
 |
| Steam Coils Brochure - Click to View |
|
|
 |
| Steam Coils Drawing - Click to View |
|
|
General
Luvata steam coils are specifically desinged with condensate management in mind. Tube and connection sizes are combined to limit condensate retention in the coil, preventing water hammer while delivering even distribution of steam on the entire face.
With single-tube coils, the steam supply and condensate return headers and connections are normally at the opposite ends of the coil. Uniform steam distribution to each of the coil core tubes is accomplished through carful header assembly design. The steam supply connection should be located in the centre of the header, with a perforated plate-type baffle located directly behind this connection. Carefully sized orifices are located in each of the core tube entrances into the header.
Dual-tube coils utilise a smaller inner tube, with precisely spaced, directional, orifice-type perforations. This helps to direct condensate flow to the return header. The steam supply, condensate-return headers and connections may be fabricated in 'same-end' or 'opposite-end' orientation.
|
Specifications
Tube Material
- Copper
- Copper Nickel
- Carbon Steel
- Stainless Steel
Additional tube material available upon request.
Fin Material
- Aluminium
- Copper
- Stainles Steel
- Carbon Steel
Additional fin material available upon request.
Standard or steam distributing construction is available for high and low pressure applications. Standard steam type is 5/8" or 1" tube steam coil, known as the single-tube design. Any steam coil can freeze when exposed to sub-zero temperatures without the proper drainage of the condensate. Steam-distributing 5/8" and 1" tubes are "freeze resistant", known as the dual-tube design
| Applications
- Commercial and industrial heating systems
- Commercial and industrial drying and processing applications
|
111 Second Ave. NE, Suite 308
St. Petersburg, FL 33701
Phone: 1-888-568-4288
|
Rex Sparks: ext. 1 rex@southerncomfortcoil.com
Tom Sparks: ext. 2 tom@southern comfortcoil.com
John Fitzgerald: ext. 3 john@southerncomfortcoil.com
|
|
